Metal Lath

Self-Furred Lath is used extensively in exterior stucco work over sheathing

and as a plaster base over masonry walls. Self-furring dimples or embossed “V”

grooves hold the lath approximately ¼ inch away from solid surfaces to aid in the

keying of stucco to the lath. AMICO self-furred lath does not require additional

self-furring mechanisms to function as required by ASTM C1063.

Dimpled (dimples spaced approximately 4” on center in both directions)

V Groove (embossed “V” grooves spaced 6” on center lengthwise)

*25 bundles/pallet at Fontana, CA facility only

As per current revisions of ASTM C-1063, metal lath applied to solid substrates must

have ¼” self-furring properties, built into the lath sheet. Therefore, AMICO recommends

the use of self furred (SF) lath over solid substrates, as required by current

codes. Self furred lath is not required over framing members less than 15/8” in diameter

or over open framin

Colors Available